5.0
Feb/25/2020
Delivery 18 days (ordered before the epidemic), similar to new, do not know the original or copy, but works as the original. Of the 10 pieces 1 was defective, it kind of worked, but the consumption current is 25 times higher than the rest. The output voltage of each is different, from 3,25 to 3,39 V, but this is acceptable for Datasheet (plus or minus 3% of the nominal value). The current of consumption without a load of 1,5 µA, correspond to the Datasheet (input quiescent current as I understand). added a plate with measurements, see for yourself. Load resistance (resistor) measured through the ESR meter, I think exactly. The maximum load current checked (short), 220 Ma pulls, the voltage falls by 0,03 v. Bought to reduce the power consumption of Arduino Pro Mini, in sleep mode with the factory regulator at 3,3 V the board consumed 74 µA when powered by 4 V, soldered it and connected raw power to mcp1700 (2 leg vin), and 3 leg (Vout) filed on VCC. Now the fee consumes 22 microns, 3 times less! Very satisfied with the result